Aluminum Can Planter
Aluminum Can Planter
3D
Published 2019-03-04T15:44:24+00:00
An Aluminum Can Planter!
I designed this planter in fusion 360 for the #Hope3D design competition. According to TheWorldCounts.com we use about 200 billion aluminum cans a year, roughly 6,700 cans a second. This is enough to go around the world every 17 hours. This statistic to me was extremely shocking to me as I thought that the worlds consumption of soda and beer was not as extreme as it truly is. This design is my idea to try and lessen this by turning it into a posotive impact on the environment.
The planter is in 3 parts, the top, the bottom and the cap. The main idea behind this design was to mimic the design of a can with the ability to stack. with this in mind I tried to make the item as printable as possible.
This design has drainage holes in the bottom of the "top" piece which allows water to flow to the plants below them when stacked, you will have to poke holes into the bottom of the top can for the drainage to work, but this is easy to do with scissors.
The "cap" model is for covering the top edge of the topmost can as it can be somewhat sharp depending on how you cut it.
The "bottom" piece is used for the stacking mechanism. It has 3 arms which holds the cans on top of it high enough to allow sunlight to hit the plant.
I would love to see anyones print of this planter so please share it on this page :) happy printing!
| 发表的日期 | 04/03/2019 |
| 让时间去下载 | 2 - 分钟 |
| 支持自定义 | YES |