Blade Runner 2049 K's Pistol
Blade Runner 2049 K's Pistol
3D
Published 2017-10-13T15:35:10+00:00
I Present to you all Officer K's pistol from the new Blade runner 2049! I finished this model 2 days before the movie release, which was a great movie I think. this was a day project brought to my attention by the community and so here it is print easy in less than 24 hours and align while glueing with 1/4" dowels. IMPORTANT to assemble, glue body and grip first, then glue guard, finally slide barrel thru guards rail system and butt up against body for final glueing
standard printing in whatever orientation works best for you, DO NOT use supports when printing barrel,(outside divets) its overhangs are within limits to not need any and will require no cleanup and come out looking great..dont use them like i did...cleanup was horrible, its ok to use maunal supports for the sight bumps, otherwise your choice to use the 1/4" dowel channels for alignment while glueing or not. simple
| 发表的日期 | 13/10/2017 |
| 让时间去下载 | 960 - 分钟 |
| 尺寸大小 | 253mm x 150mm x 32mm |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |
This printed really well, the trigger guard shifted slightly, but nothing I can’’t fix. The guns is a little bit too big, but I’m not worried about it since its going to be a display piece. I need to do some sanding and gap filling before I paint it, very happy with the final print, thanks again Ethan for the excellent model.