Loading
Chibi Grim
Published 2016-10-10T14:09:14+00:00
Share 3D Post on Facebook
This is a fantastic design that printed perfectly. ColorFabb PLA/PHA Ultra Marine Blue 0.4 Nozzle 0.2 Layer height 2 Bottom layers 3 Top layers 2 Perimeters 50 mm/s
Printed well, looks great!
Great Print awesome design , painted nicely no trimming.
Wanhao D7 0.1mm with Monocure Black
Printed at 40% size on my Ultimaker 2+ Ext. with Colorfabb White PLA. No supports. Great little model!
Print in ABS Glow in the dark on my D-Bot
Standard settings in Cura, 0.175 layer height, 200 degrees on the extruder, 50 on the bed. Built-in BuildTak surface, and NO RAFT! 4 hours, 7 minutes to print, but it was so worth it!
print it in my prusa i3 and it's awesome
fantastic little print! thank you keep up the good work. Layer/H 0.15
200 °C print 60 °C Bed 0.1 mm layer
Painted in acrylics and finished with an assortment of static grass, pebbles and fluff. Write up with more photos can be found here: https://stuwahacreations.com/2018/03/01/3d-print-painting-part-7/
Black Verbatim PLA 0.3 layer height Tronxy x1
Thank you for an Awesome Model. Printed with CRON PLA, 0.3 Nozzle, 0.2 Layer height, 25% infill.
Printed at 32mm tall, with a 0.2mm nozzle and 0.1mm layer heights. Lovely model
Printed with inland PLA 0.2mm
Since everyone dogs on Makergeeks so much I decided to try printing this with some of the translucent red.
Acetone vaporsmoothed. Lost a bit of detail on the teeth. Pretty good model for painting practice. Still a lot to improve on!
Solutech translucent green pla temp 208 .6 nozzle
Printed in 0.2 Layerhight / 50mm/s / Fillamentum Vertigo Galaxy
Tevo Flash actually lol no selection avail! love your models!
This little guys DEFINITELY need supports everywhere! With the default support settings in Cura, they are simple enough to remove and leave almost no surface blemishes. Just be sure to set the [Support Z Distance] to the layer height you are using. In my case, 0.1mm. Straight off the printer, he looks great, but to make him pop, I decided to give him a few painted elements. Painted with Plaid's Multi-Surface Acrylic paints, I think he looks amazing.
My legion of downsized chibi reapers to send after my players in our D&D campaign.
Printed in 0.2mm, at 60mm/s with some cheap glow in the dark filament and I think he turned out great! I'm still very new to 3D printing and this was my 5 successful print with the Ender 3 (we don't talk about the failed kitty cats while tuning). Came out better than I expected and can't wait to see him glow in the dark. I think I need to go bigger with more infill than the usual 20% from some of the reviews I read about the filament. Going to see if I can get it painted and leave just his face on show. Great model!!
Lovely Little Death-figure
0.2mm Layer Height, 0.4mm nozzle.
Printed on a Geeetech A10 Amazon Basics PLA White 0.15 Layerheight Coated with Black Spraypaint
cute one, fast print, easy to paint, even for beginner like me
0.2 layer height, 35mm/s, polymaker trueblack PLA
0.2 mm PLA and my first painting ever
Kinda looks funny :)
A remix I found on another site, Your model is great.
Timelapse: https://youtu.be/eVfRX7pOIF8
Oh, it's GRIM reaper... well, that's embarassing...
Printed and painted with acrylic paints 2021
Chibi Grim in Glow in the dark 1.75mm PLA, then filled with black enamel paint.
Printed on Prusa Mini+
Printed on Elegoo Neptune 4 with "Fine" profile, took 67 min (plus one for the filament change). Love this grinning ghoul. Thanks for sharing.
Thank you for this incredibly cute model! It was really a lot of fun.
Here is another version of the Chibi Grim. @Ogareg Miniatures Butterfly has joined him and the little Grim is holding your Lily Flower. I love this model so much. Thanks for sharing!
Fun! This printed very nicely with no support required. Thanks!