Endurance Lasers Connector Plate Prusa i3 MK2/2.5/(S) (WIP)
2,275
views
23
downloads
0 comments
Loading comments...
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Endurance Lasers Connector Plate Prusa i3 MK2/2.5/(S) (WIP)
3D
0
0
Add to Collection
Description
This Plate will let you connect the EnduranceLaser Module to your Original Prusa i3 MK2/2.5/(S). You just need to remove your Extruder and connect it to the X-Carriage.
Printing Details
rotate it 270° on the Y-Axis to lay it down. I used 55% infill.
Technical Information
Status | Rejected |
让时间去下载 | 85 - 110 分钟 |
材料数量 | 20g |
尺寸大小 | 92x60x5mm |
支持自定义 | YES |
More Information
Object Parts