NASA Saturn V Space Rocket
NASA Saturn V Space Rocket
3D
Published 2018-09-04T15:46:07+00:00
Thank you CraftUnique and CraftBot for this challenge. I loved Meccano and Lego when I was a kid, Clickaloo can be exactly that replacement for my kids.
When I first started with this challenge, I realised that my printer will work overtime to manufacture existing parts. I calculated that the production does not justify the cost of printing the 402 parts for the space rocket and made the decision to have them laser cut out of plexiglass. I then ordered all the straight parts (1HSP to 5HSP) to be cut out of plexiglass and added longer parts (6HSP to 10HSP). I ordered a bunch to allow my kids to build according to their imagination. It seems that I neede to do the same for pins...
The Clickaloo NASA Saturn V Space Rocket was built with X items/objects. It has a total height of 1330mm and a diameter of 135mm, this is more or less a scale of 1:83. As with the actual Saturn V, it was divided into three stages. As for the rest of the detail, it is not an exact replica.
Parts List
Stage 1 (144 parts)
- 32x 10HSP [10 Hole Straight Plate]
- 3x 32HLCD-I [32 Hole Large Cylinder Double - Inner]
- 8x 135SFA-O [135° Single Fold Angle - Outer]
- 8x 2SLCP-FT [2 Stack Lock Click Pin - Flat Top]
- 8x PL [Pin Lock]
- 5x SW [Small Wheel]
- 1x 5HSP [5 Hole Straight Plate]
- 2x 1HSP [1 Hole Straight Plate]
- 4x 90SFA-I [90° Single Fold Angle - Inner]
- 4x 3SFP-FT [3 Stack Free Pin - Flat Top]
- 69x 2SFP-FT [2 Stack Free Pin - Flat Top]
Stage 2 (111 parts)
- 16x 10HSP [10 Hole Straight Plate]
- 16x 5HSP [5 Hole Straight Plate]
- 4x SW [Small Wheel]
- 2x 32HLCD-I [32 Hole Large Cylinder Double - Inner]
- 1x 16HLC-I [16 Hole Large Cylinder - Inner]
- 4x 3SFP-FT [3 Stack Free Pin - Flat Top]
- 64x 2SFP-FT [2 Stack Free Pin - Flat Top]
- 4x 90SFA-O [90° Single Fold Angle - Outer]
Stage 3 (147 parts)
Nose
- 1x 2SFPA 148mm5 [2 Stack Free Pin Axle 148mm5]
- 8x 2HSP [2 Hole Straight Plate]
- 3x 1HSP [1 Hole Straight Plate]
- 4x 135SFA-I [135° Single Fold Angle - Inner]
- 2x 3SFP-FT [3 Stack Free Pin - Flat Top]
- 12x 2SFP-FT [2 Stack Free Pin - Flat Top]
- 1x 135DFA-I [135° Double Fold Angle - Inner]
- 1x 16HMCD-O [16 Hole Medium Cylinder Double - Outer]
Propulsion
- 8x 5HSP [5 Hole Straight Plate]
- 1x 3HSP [3 Hole Straight Plate]
- 1x 1HSP [1 Hole Straight Plate]
- 3x 3SFP-FT [3 Stack Free Pin - Flat Top]
- 8x 2SFP-FT [2 Stack Free Pin - Flat Top]
- 1x SW [Small Wheel]
- 1x 8HMC-O [8 Hole Medium Cylinder - Outer]
- 2x 90SFA-O [90° Single Fold Angle - Outer]
Fuselage
- 8x 8HSP [8 Hole Straight Plate]
- 16x 2HSP [2 Hole Straight Plate]
- 16x 135SFA-I [135° Single Fold Angle - Inner]
- 1x 16HMCD-O [16 Hole Medium Cylinder Double - Outer]
- 1x 16HLC-I [16 Hole Large Cylinder - Inner]
- 8x 3SCP-FT [3 Stack Click Pin - Flat Top]
- 8x 3SFP-FT [3 Stack Free Pin - Flat Top]
- 32 2SFP-FT [3 Stack Free Pin - Flat Top]
There are 402 parts required to build the NASA Saturn V Space Rocket. All the flat parts (HSP - Hole Straight Plates) were laser cut from Plexiglass.
For the pins, I have designed an Easy Pin that does not require as much compression and will not break when inserted. More about this on this link:
https://www.myminifactory.com/object/3d-print-74016
| 发表的日期 | 04/09/2018 |