Eggpider
Eggpider
3D
Published 2018-04-12T15:18:47+00:00
This object was made completely in Tinkercad. https://www.tinkercad.com/things/kzKyWdXOxgv
Check this stop motion video. https://www.youtube.com/watch?v=Rw1glDbBzXw
So here is my Easter Challenge Design.
From the depth of creativity, nature and mechanics of movement this design is born, The Eggpider.
Enjoy it and have fun assembling, take a few minutes.
instructions below and you can also check the pictures i've uploading.
To assemble it you will need the following:
-Screws:
-M2 08 screw ----- 5 pcs.
-M2 12 screw ----- 18 pcs.
-Nuts (opcional).
note: The pieces fit well with a little effort and screwdriver. Nuts are not necessary but it looks better.
-Tools:
-Screwdriver.
-Drill or MiniDrill (not necessary but it can be used to help).
-Pliers.
-Maybe a cutter to better finish the pieces.
-3D printed Pieces:
-Body:
-Central axis
-Legs
-Joints
-Head:
-Forelegs
-Head
-Back
*More detail in pictures.
NO SUPPORTS NEEDED.
As you can see, this design was made with the correct 3d printing criteria and does not require much previous knowledge or anything more than a few minutes and patience to put it together.
Believe or not, it's completely designed in TinkerCad, took me about a week.
First of all, this design is completely printable.
Dont worry about the settings, those are detailed in the pictures. i tested all of them and assambled.
printed with an Anet A8,
70 mm/s.
0.04mm extrusor.
1.75mm black PLA.
195° C.
0° C Hot bed.
Glass bed with the Bar of glue for adhesion.
| 发表的日期 | 12/04/2018 |
| 让时间去下载 | 50 - 80 分钟 |
| 材料数量 | 70 grams |
| 尺寸大小 | 43.5x43.5x61 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |