Recycled mud guard for bicycle
Recycled mud guard for bicycle
3D
Published 2014-06-24T18:22:56+00:00
This Mud Guard uses any Coke bottle or Coke products bottle as the mud guard. u can use either a 500ml, 1ltr or 1.75ltr bottles.
The main housing is 3D printed and the guard is attached by just screwing the cap of the Coke bottle with the housing in between. This product saves on material when 3D printing as it uses little support and the guard is made of a discarded PET Coke bottle which is cut in half. By painting the inside of the bottle you can have a range of guards fitting your own moods, or your bikes coulor scheme with little to no expense other than the housing. by painting the inside of the bottle the outer part gets a high gloss, high quality look at no extra cost.
The main housing is printed at 0.15mm resolution with 10% infill. The only store bought parts are the two M3 nuts and bolts.
| 发表的日期 | 24/06/2014 |
| 让时间去下载 | 180 - 200 分钟 |
| 材料数量 | 36g |
| 尺寸大小 | 9cm x 5cm x 12cm |
| 复杂程度 | 容易 |