Loading
Samus Aran - Metroid - 25cm model
3D
Published 2020-01-05T16:44:49+00:00
Samus Aran - Metroid - 25cm model
3D
Published 2020-01-05T16:44:49+00:00
Samus Aran is a fictional character who serves as the protagonist of the Metroid science fiction action-adventure game series by Nintendo. She was introduced in the 1986 video game Metroid.
Samus Aran is an ex-soldier of the Galactic Federation who became a galactic bounty hunter, usually fitted with a powered exoskeleton that is equipped with weapons such as directed-energy weapons and missiles. Throughout the series, she executes missions given to her by the Galactic Federation while hunting the antagonistic Space Pirates and their leader Ridley, along with the parasitic energy-draining organisms called Metroids.
Samus has appeared in every Metroid video game and has also been featured in media outside of the series, including in the Super Smash Bros. series and in the comic book continuation of Captain N: The Game Master. She is well known as one of the earliest female protagonists in video game history and has remained a popular character since her first appearance.
| 发表的日期 | 05/01/2020 |
One of my favorite models, kinda wish there was an assembly model to make bigger - but amazing work regardless
100mm height. Looks awesome. Nice work!
Just finished the print, near 2 days of printing, still must sand and fix some parts. 130% -32cm without base
Not bad for a 75% scale.
Printed on Elegoo Mars at 90%, Vallejo colors with Airbrush :)
Printed this on my Photon. I printed the full figure at about 95mm.
I really loved printing this model. I made it as big as I could without trying it make it in smaller places at 130%. What do you think of the color?
One of my favorite prints this far. Question for the designer though. Would it be possible to have a version with the arm cannon from the Metroid Prime series? I for one would be thrilled to have that option and would even pay for a model with it.
Perfect model, thank you very much ! Printed on Anycubic Photon S.
Printed on my elegoo mars at 50%. The helmet and logo were found on thingiverse and I built a base for her.
I'm in love!!! ❤ 23:15:50hrs print time, PLA Overture Space Gray, tree supports. The supports on the base need to be sanded off but it's fine with me. Thank you for this amazing model.
Excellent model. Very well done.
Black base, pewter rub n buff finish
on Phrozen sonic mini, at .05, 2 sec, with Water washable resin. 125mm high in 5 hrs... what a crazy fast machine.. thanks for the awesome file.
Printed in one piece 150mm tall. Hollow, with 0.03mm layer height.
Went for more muted colors on the armor. Used Testor's enamel paints for armor and body suit, used highly pigmented acrylic for skin and hair.
Printed at 80% scale.
Painted with Vallejo model paints
In love with this print.
printed at 200%. painted w/ my noobish skills. Thanks for this amazing model!
Legs and base printed in PLA on an Ender 3 and the rest in an Anycubic Photon.
What an awesome model! Thank you. I saw it and HAD to paint one. It turned out amazing. @toy.hunters.collecting on instagram
Printed on an elegoo mars. Shes 10 inches tall. Awesome model. Thank you so much!
Printed on a prusa i3 mk 3 at 0.07mm layer height. Around 25cm tall. Great detail, thanks for the model!
My First 3D printing !!! thanks for this amazing model
After painting many 32mm models, I wanted to paint something big and I loved it! The model is gorgeous and there are a lot of details you can work with.
some plane cut were performed to fit the model in the plate, but i obtained a great result, Many thanks for the model.
Good Stl
Samus finished up during lockdown as well. She also fell during a rare 5.7 earthquake in my area and has some minor cracks.
inspired by some of the picture you guys posted ;)
Fantastic model, thank you for uploading! This was my first time painting something like this!
The idea of showing Samus in the middle of her transformation is pure genius! Thanks Printed Obsession for this amazing model!!! This is the first model that I printed on my Longer Orange 30 and if you look hard enough you can spot plenty of printing errors... but I learned so much in the process :D
Love your work, absolutely stunning designs. Printed this at a smaller scale since I like to work smaller, and had some trouble since I'm new to printing (luckily all the mess is on the back of the model). However this might be the most fun I've had painting a miniature in ages. Thank you for putting such work out for free! will be back here to spend some money for sure. printed on creality ld-002r
Layer height: 0,025mm. Legs printed solid. Body hollowed, no infill. Had to use a lot of putty since the two parts didn't fit anymore after curing. But awesome model!
Decided to change up the colours a little...
Printed at 50% with my heavily modified Ender 3, then painted with acrylic paint.
I like the digital aspect a lot of people took. I tried my hand at it as well. It has been awhile since I've painted as well.
thanks for sharing such great work with us.
Thank you for this awesome print!
Printed on Anycubic Photon Mono X. Going for an aged bronze/copper statue look.
Printed in Geeetech silk-silver pla, at 200° with bed at 60° 0.16mm layer height. Slight imperfections on the back and one under the chin, but I'm really impressed with her, just got to print the base in black tomorrow.
Thanks for the great model, easy print with pre cut parts :)
This is an awesome model. Metroid has always been an all time favorite of mine. I have yet to paint it, but I have added a couple things. Samus @ (75% of original) 215mm height single print. Customized a Samus helmet to fit her head and added a blast from the cannon with an LED. I think I may print a larger one in individual pieces so that I can run a wire through her arm to a USB for power.
Samus Aran with USB powered lighted blaster!
Awesome design and its a FREE model!! such awesome designer! love it!!
Hi, here is my achievement
Printed on a Anycubic Phonton D2 DLP Printed and Painted as a 2022 Xmas gift
Reduced to 17cm. Thanks you so much for this incredible model. Love it
Great sculpture i had a blast painting it. Painted by Gislunn Painting
layer .12mm infill 5% 37 hours Very nice model, congrats :)