Candy Bowl
Candy Bowl
Published 2015-02-22T13:12:23+00:00
This 3D-printable bowl is perfect for candy and other goodies. Use it to serve your guest on a movie night and also show off your favourite hobby and 3D-printing skills!
We designed the bowl specifically for testing 3D-prints with large-bore nozzles. In this image we show the result of a 1.0 mm nozzle 3D-print at 0.8 mm layer height.
Even though it is possible to print this bowl at higher speeds, we kept it down to achieve a high-gloss shiny surface. The bowl is 136 mm wide and 60 mm tall. At around 20-30 mm/s it took less than two hours to print.
The bowl has a simple and decorative shape which makes it easy to print. To get rid of the layer-change zipper-line we used vase-mode in our print settings.
To make the bowl strong and achieve optimal transparency we 3D-printed the candy bowl using taulman 3D t-glase (PETT) filament.
---
By Creative Tools
- http://Creative-Tools.com
- http://google.com/+CreativetoolsSe
- http://twitter.com/CreativeTools
- http://facebook.com/creativetools
- http://youtube.com/creativetools
Print at 0.2 mm layer height, with 10% infill. This uses 50 g of filament and takes 348 minutes.
Date published | 22/02/2015 |
Benoetigte Zeit | 348 - 358 Minuten |
Menge an Filament | 50 g |
Dimensionen | 136 x 136 x 60 mm |
Schwierigkeitsgrad | Easy |
PET G 0.2 mm Layer