Destiny Hunter Knife
Destiny Hunter Knife
Published 2014-11-27T13:43:55+00:00
So in keeping with the growing collection of Destiny objects, here is the Hunters knife well my version of the hunters knife as I know there are a few designs floating around the internet.
It felt like a no brainer to model one and have it matched with my conduit rifle so you can build your own hunter cosplay build.
The base mesh was made in sketch up using a imported refernce image found on the internet. The model was exported from sketch up and imported into zbrush for slicing and added details.
The file was further checked in netfabb basic and made ready for printing.
I printed this knife on a replicator 2 in grey PLA fillament.
(UPDATED VERSION - Fixed top)
_________________________________________________________________________
If you purchase this object through the MyMiniFactory Store please note:
-
This product will come unassembled and unpainted when you buy it. We encourage you to be creative, personalize it as you wish. Express your awesomeness and share a picture of the final result with us!
-
Unless you have a particular request, the colour of your print will be chosen at random and will be printed in either ABS or PLA filament.
-
Delivery time will be between 1 and 4 weeks from the moment you order the object. This is dependent on your location and the length of time the object takes to print.
-
Email info@myminifactory.com if you would like any further information or if you have any special requests.
-
Sometimes orders will be printed live on MyMiniFactory TV - check it out here.
_________________________________________________________________________
I have included a image which displays all the orientations for each part so no confusion! I finished the model using spray paints and silver guilding wax. Look up painting techniques if you want to get flashy with your finishing!
Date published | 27/11/2014 |
Benoetigte Zeit | 300 - Minuten |
Menge an Filament | 85 |
Dimensionen | 408,83.59.87.35 |
Schwierigkeitsgrad | Very Easy |
Printed by: ITCHY PIG CREATIONS Printed with a Makerbot Replcator 2 Sliced with Simplify3D Print time- 6 hours 7 min Print settings- .20 mm layer height- 2 shells- 20% infill filament- Makerbot Cool Grey