Monster High Blank Torso
Monster High Blank Torso
3D
Published 2015-08-24T12:15:29+00:00
Part 2 of 2 of the initital pieces from our MyMiniFactory Monster High Hack project*. Check out the parts created so far.
The zip files contains a 3D printable version of the Monster High doll torso.
Uses for this head -
1. Download, 3DPrint and decorate however you want, e.g with sculpey clay, artists acyrlics etc. Please note the shoulder joints are not working 100% perfectly, so arms will not be fixed in place.
2.Download the STL, import into your favourite design software (e.g zbrush), cusomise and then print!
How?
These body base mesh's were generated using a David 3D scanner at the Imakr store London. The joints were re-created using Solidworks Software. The mesh's were cleaned in Zbrush, and the joints from Solidworks also imported into Zbrush to be merged into the cleaned up scans.
*This is a stage 1 file, so not 100% perfect, the legs and head attach fine, however the arm joints still need to be worked on to allow the arms to fix in place...stay tuned for updates, or if you wish to also contribute to this project please maker contact.
Print at 0.10mm laye height, support on, 20% infill. This takes 2 hours 36 minutes, and uses 13g of filament.
| Date published | 24/08/2015 |
| Benoetigte Zeit | 130 - 170 Minuten |
| Menge an Filament | 13g |
| Dimensionen | 26 x 29 x 99 mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Medium |
