Ozen's White Whistle
Ozen's White Whistle
Published 2019-08-07T16:42:59+00:00
This is a working version of Ozen's White Whistle from Made In Abyss. I spent the better half of 4 months crafting this and researching how to make it work.
I've printed it on my Mini delta in multiple sizes with success. The custom supports break off of it fairly easy, and there's minimal filing needed to be done. And using PLA filament at 180c I had no need for any other supports besides the ones I custom made. If you find yourself needing supports. please contact me so I can change that on the checkbox here.
There's a dual chamber inside of it. So a soft breath of air produces a deeper note. But a much harder breath of air will make a very loud high pitch whistle. You'll notice it starts to get quiet before the second chamber activates.
Please enjoy. Donations really help. Arigatogozaimasu!
Make sure the cooling fan is facing the front side directly. The back prints fine. This image was before I added the custom supports, and I printed it with no supports in that photo as well.
Added a version without supports.
Date published | 07/08/2019 |
Benoetigte Zeit | 4 - 7 Minuten |
Dimensionen | 93.6156 mm x 52.4993 mm x 83 mm |
Support Free | YES |
Probably one of the coolest things I've printed on my Elegoo Mars. Makes a great little doot!