3D Printed Wearable Cosplay Wing Set!
$12.00 3D Printed Wearable Cosplay Wing Set!
3D
Published 2019-07-17T12:27:53+00:00
This is a wearable and functional wing kit for all your cosplay and con needs! We designed and built this kit for a personal cosplay project but were so happy with the results, we had to make it available to the world. When fully extended, the wings are over 8.5 ft (2.6 m), and collapse to just over 1.6 ft (0.5 m). These things are HUGE! You can see the motion here on our Instagram Post: https://www.instagram.com/p/B0JKb-PnGgZ/
This was designed in Fusion 360, and was made to work with readily available and accesible components. It doesn't require pneumatics or a massive motor, and should be able to support decent weight thanks to the aluminum framing and spring assistance. A full BOM is included in the assembly instructions, found here, http://bit.ly/30JoxgG
We sell a kit on our Etsy Page that contains all the purchased hardware which can be found here https://etsy.me/2OezTIe
We hope this design will act as a "skeleton" for YOUR cosplay creation. PLEASE post pictures and videos of what you make! We cannot wait to see it!
When printing the joints, please keep in mind these are structural parts! Meaning they should be printed with at least 4-5 walls, and 100% infill. If they are printed with less plastic, the risk of them breaking during use increases.
| Date published | 17/07/2019 |
| Precio | $12.00 |
![Picture of print of 3D Printed Wearable Cosplay Wing Set! Esta impresión fue cargada por [IG] Burnsy](https://cdn.myminifactory.com/assets/object-assets/5d2ea53993935/images/bcbf46f1-5a89-490b-af20-9bbe88550270.jpg)
![Picture of print of 3D Printed Wearable Cosplay Wing Set! Esta impresión fue cargada por [IG] Burnsy](https://cdn.myminifactory.com/assets/object-assets/5d2ea53993935/images/dc86bcc9-9d46-44b5-9bbd-2e418a03373e.jpg)
![Picture of print of 3D Printed Wearable Cosplay Wing Set! Esta impresión fue cargada por [IG] Burnsy](https://cdn.myminifactory.com/assets/object-assets/5d2ea53993935/images/dc0da68e-0aad-497b-acf1-5875329f7ef3.jpg)
Work in progress - having to adapt slightly for UK supplies