Anglepoise GoPro stand
Anglepoise GoPro stand
3D
Published 2014-06-25T12:17:43+00:00
The Anglepoise mount for the Go pro is a diverse multi-angle mount ensuring that you get the perfect shot. It uses elastic bands to move the camera into a stable position that can be changed again when needed.
You can print the base on a low resolution however we suggest printing the bars on a medium to high resolution and the rivets and washers on the highest settings possible. After printing you may need to glue the rivets together to stop them from falling out and you will also need to add at least 2 smallish sized elastic bands to put into the hooks on the model to give it the structural mechanism it needs. If you can get your hands on small rubber O-rings to replace the washers on the model it will be easier to stabilise at an intended position. Total Print time - 8/9 Hours Total Material usage - 77 Grams
| Date published | 25/06/2014 |
| ¿Cuándo tiempo lleva? | 480 - 540 minutos |
| Cantidad de filamento | 77g |
| Complejidad | Medio |