Nintendo Switch Vangard Grip v2.1
Nintendo Switch Vangard Grip v2.1
3D
Published 2017-04-03T10:08:40+00:00
This is a custom joycon comfort grip for the Nintendo Switch. The original idea of this design is that the joycon rails would be tilted outward by 20 degrees to make the overall controller layout more similar to a standard controller. It's been separated out into 3 pieces to make printing/finishing easier, and also to make it more customizable with different pieces.
This set currently includes 5 different rail pieces, 2 different grip pieces, and 9 different crest pieces to choose between. you will need at least one of each to assemble.
Eventually, I want this to grow into a wide range of pieces that can be easily interchangeable, so people will be able to make the perfect joycon grip to fit their own personal comfort, and style preferences. I encourage everyone to remix this with their own pieces, or comment with suggestions or ideas you would like to see with this.
You will need at least one rail piece, one grip piece, and one crest piece. Print all pieces standing upright, as they have been uploaded, for better strength and to keep the docking rails and grip smooth. I'd reccomend printing with 3 shells, and 10-15% infill. Be sure to sand the rails smooth where they touch the joycons for a better fit.
ASSEMBLY:
This is designed to be held together with two m3 0.5 nuts, and two m3 0.5 screws 13-16 mm long. However, it can also be glued together or printed as one piece with just a little tweaking to the files.
STEP 1:
Insert two M3 0.5 nuts into the slots on the crest piece, and line them up with the holes on the back.
STEP 2:
Fit the crest and the grip into the slot on the rail section.
STEP 3:
Insert two M3 0.5 screws into the holes on the back, and screw them into place.
| Date published | 03/04/2017 |
| Dimensiones | 160mm x 47mm x 95mm |
| Tecnología | FDM |
I printed everything out with a .1mm layer height and sanded it down for a smooth surface. This thing is great!