RC4WD Trailfinder 2 Mojave LWB Chassis Body Mount
$7.00 RC4WD Trailfinder 2 Mojave LWB Chassis Body Mount
3D
Published 2019-09-09T21:16:04+00:00
To those of you with a RC4WD Trail Finder 2 LWB with Mojave Body, I think it is very clear that it is a masterpiece of design. There is, however, one small problem; the body installation and removal process is a little in depth to say the least. Ampro Engineering is very proud to annouce a new body mounting system for the RC4WD Trail Finder 2 LWB Mojave Crew Cab. This set will let you install and remove the body with no tools and only the removal of a couple of body pins. The shell is rigidly mounted and cannot accidentally pop loose. All printed parts are in one order.
PLEASE NOTE THAT THE METAL FLANGE WITH THE THREADED STAND OFF ON BATTERY/ELECTRONICS PLATE WILL NEED TO BE CUT OFF.
It will need four body pins the rear two if you are running a bed. You will need 25-30mm M3 machine screws to install this along with a couple smaller (8mm) for the body side mount. Please see the video below for a full installation.
| Date published | 09/09/2019 |
| Precio | $7.00 |
Will your body mounting system for the TF2 LWB work on the RC4WD D110 case for me?