Stearing Wheel Knob car part
5,106
visitas
438
descargas
5
colecciones
0 comentarios
Cargando comentarios... 
Stearing Wheel Knob car part
3D
Published 2018-05-17T09:47:54+00:00
83
0
Add to Collection
Descripción
For the assembly, use a M6 bolt and nut and a M4 bolt and nut. You can also use some two layers of 1mm foam sheets on part A and B each.
Remove all supports and make sure that all parts are rigid. Use some grinding paper if the parts don't fit. directly.
Insert the bolts and nuts (if the nuts don't fit you can heat them up a bit but be careful not to deform the model)
stick the foam sheet on pieces A and B.
Attach to stearing wheel.
Original designer : Lukasz Osiak
Detalles de impresión
Printer: Tevo tarantula
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 50%
Printed in PLA, 195/48. First layer 200/55.
Información técnica
| Date published | 17/05/2018 |
Más información
Archivos