Santa's Workshop (Tinker Cad Christmas)
Santa's Workshop (Tinker Cad Christmas)
Published 2017-12-18T18:00:41+00:00
This is my modern day interpretation of Santa's workshop which is in the form of an ornament for the Tinkercad Christmas contest. It a moble workshop so Santa can be adding the finishing touches to the presents while in between deliveries. I also added my own personal touch of the robot. The "FRC 319 BOB" is my highschools robotics team. I felt this was the I could add in my personal touch. I saw other submissions, and didn't see any other designs like mine.
When printing out my design, I printed "test" prints of it, which were half the original size. I ended up finding some flaws in the design, so I redesigned it. Then I found a couple more flaws in the design, so I redesigned it again. I ended up printing three veisons until it finally worked. Sadly, when I printed out the full size version, something ended up happening while it was printing, and only printed half the design , and then made a "birds nest" of the printing material. So the one in the picture is the last test print copy. The time below is the time for the test print, which took about 2 and half hour to print. The full size takes 13 hours.
Date de publication | 18/12/2017 |
Durée d’impression | 120 - 150 minutes |
Dimensions | 6 in. x 3 in. x 2.8 in. (152.4 mm x 76.2 mm x 71.12 mm) |