Switch Pro Holder_V2
35,618
views
2,857
downloads
26
collections
13 comments
Loading comments...
Switch Pro Holder_V2
3D
Published 2017-04-10T11:13:15+00:00
563
13
Add to Collection
Description
This is a support for being able to play with your pro controller attatch to your nintendo switch ( if you dont like the other controller). you could be able to change the position like you want.
The photos are the V2 files. not the V1
Détail de l'impression
I print with PETG and work very well.
I have not try it with PLA, so if somebody doing it let me know how it come out.
I print it on the side with support
for PETG I print it at 0.3 layer height and 20% infill, 7 top and bottom layer and 4 perimeter shells.
For the LOCK i change the infill for 50% but not realy necessery
feel free to change the setting
For the all assemble you will need 2 hex cap screws M4 25mm and 2 nylon lock nuts M4
Technical Information
Date de publication | 10/04/2017 |
Durée d’impression | - 552 minutes |
Quantité de filament | 113.76 |
Dimensions | 37x110,5x80 |
More Information
Object Parts
I send you some photos ... not in order but hope it help you to mount the support. some advises: tighten the bolt to the correct tension to avoid moving when you use the small lever for adjustment. and for installing the switch and the controller, you need start with the top and finish with the bottom to lock it in place. I hope that was clear :P sorry for my bad english