Smiling Toothbrush Holder
Smiling Toothbrush Holder
3D
Published 2017-11-22T16:47:45+00:00
Kudos to Yagokun for his original "Baby Tooth Smile"
(http://www.thingiverse.com/thing:2058973) and the remix by Cyborgdaron.
For this remix, I've added 4 angled holes large enough to fit good sized brushes and a drain system.
Model size is about 5" tall and 3.25" wide. Takes about 11 hours to print on my CR-10.
Forgive the pimples on my first print, was having some issues with Simplyfy3D... actual model is very smooth.
Enjoy!
Leave at full size for toothbrushes that have fatter handles like the ones in my pictures... reduce in size a bit for more narrow handles.
Recommend printing with support on the builld-plate only. It's really only needed on the underside of the model.
.2/.3mm layer height recommended at 40-50mm/s.
| Date published | 22/11/2017 |
| Tempo per farlo | 135 - 270 Minuti |
| Quantità di filamento | 20 |
| Dimensioni | 44 49 64 |
| Tecnologia | FDM |
| Complessità | Medium |
Printed using PrimaSelect PLA Satin white. 0.15 layers.