3DPN Spool holder (small)
1,362
views
17
downloads
0 comments
Loading comments...
3DPN Spool holder (small)
3D
Published 2018-07-25T17:31:40+00:00
1
0
Add to Collection
Description
Smaller version of my 1st design. Still has quick change. Only needs 2x m3 screws to mount, or it can easly be drilled to a a larger size.
The base should be printed vertically to reduce the support material needed, and be lowered by 7mm to cut off the bottom tabs for a surface mount and NO support material needed.
Arm1 is a general guide, and Arm2 will hold a 4mm bowden tube.
Can be mounted horizontaly or vertically with no problems.
Direct drive will have a harder time with a horizontal mounting, but it will work.
Printing Details
I recomend printing with 0.2 or 0.3 layers, 1~1.5 mm shell in petG @ 20% infill.
Technical Information
Date published | 25/07/2018 |
Material Quantity | about 90g |
More Information
Object Parts