Bowling Ball Stand
Bowling Ball Stand
3D
Published 2017-08-18T17:53:55+00:00
This was a quick Design.
Started a New Bowling Leauge and the New side of the Bowling center remolded and removed some ball stands.
So i decided to make a stand that was durable and easy to place on Table or Floor.
Out of both designs the Square one is more stable and harder to knock over. The round one is also hard to knock over but that one still tips when hit hard enough.
Both designs can be made out of ABS or PLA, PLA however allows you to spin the ball to clean it.
The ABS ball is harder to spin.
I made 2 styles, Both were 21% infill with 1mm top and bottom Shell.
One was ABS and One was PLA.
Both finished with a smooth surface however the PLA I am able to spin the ball as i clean it.
ABS one ball doesn't spin.
Print Timer will Vary, both prints tock about 4-5 hours to print at 21% infill with thw 1mm top and bottom shell
| Date published | 18/08/2017 |
| Time to do | 4 - 5 minutes |
| Dimensions | 140x140x20 |
| Technology | FDM |
| Support Free | YES |
Nice job... I modified your square version for my step-dad and it printed nicely at 40% infill. Thanks!