Candy Dish
Candy Dish
Published 2019-02-13T10:05:18+00:00
I have a moderate-to-severe addiction to Peanut M&M's, and I thought it'd be nice to have something to store them in to make me feel more sophisticated when I pig out. The pictures show it freshly printed, fresh off the build plate, and post-post-processing.
.2mm layer height
50mm/s
20% infill
I printed the first ten layers of the model in Polymaker Polyflex at 230 degrees, then printed the remainder in black Hatchbox PLA. I started at 220 degrees to help with adhesion to the Polyflex, then cooled it down to about 200. In order to reduce the dependency on supports, I printed outside-in, which resulted in some obvious blemishes, but nothing that a light sanding couldn't fix.
Date published | 13/02/2019 |
Time to do | 360 - 480 minutes |
Material Quantity | 60 grams |
Dimensions | 4" x 4" x 2" (101.6mm x 101.6mm x 50.8mm) |
Support Free | YES |
Really nice, easy print! Perfect for candy, nuts or other snacks.