Legendary Fantasy Costume Bracer
Legendary Fantasy Costume Bracer
3D
Published 2019-04-17T17:16:11+00:00
This is a costume bracer for a fantasy outfit -- you may recognize it from a famous Hylian hero, and find that it looks particularly great with a green tunic and cap. Happy adventuring!
I lightly sanded and spray-painted it brown for a leather-like appearance. I also used diluted black paint for a distressed/worn look.
To wear it, I attached faux leather straps to the back side with superglue.
I was able to print this standing upright on the flat "back" edge. Use a generous brim and make sure you have good bed adhesion, or it may start to shake loose from the movement of the y-axis as it gets taller. No support material is required in this orientation though.
Sanded with 80 grit, 120, and 240. Spray painted dark brown.
Distressed with watered-down black paint.
Straps attached to back with superglue.
| Date published | 17/04/2019 |
| Time to do | 300 - 500 minutes |
| Material Quantity | 75 g |
| Dimensions | 99.3 x 206.1 x 31.6 mm |
| Technology | FDM |
| Complexity | Easy |
| Support Free | YES |