Mario Warp Pipe Echo Dot (2nd Gen)
2,803
views
60
downloads
0 comments
Loading comments...
Mario Warp Pipe Echo Dot (2nd Gen)
3D
Published 2019-05-30T18:39:53+00:00
3
0
Add to Collection
Description
This simple design is inspired by the iconic warp pipes seen throughout the Mario series.
On the back of the design is a large port opening so you don't need to worry about your cable being damaged. There is also a 10mm hole going through this design to keep the Echo Dot from being suctioned in place due to tight tolerances. I designed this part with 0.25mm tolerance, but you can scale it up if need be.
Technical Information
Date published | 30/05/2019 |
More Information
Object Parts
Layer Height:0.2mm Scale to:50%