Playmobil Compatible Outhouse/outdoor toilet
Playmobil Compatible Outhouse/outdoor toilet
3D
Published 2018-11-15T16:12:09+00:00
This is a Outhouse I designed in Fusion 360 to be compatible with Playmobil figures.
All the parts should be printed in the provided orientation.
METHOD:
This is the method to paint the wood detail on the outhouse walls and door:
1: Paint the entire thing a cream color.
2: Mix up a 1 part paint to 2 part thinner wash with the brown paint.
3: Cover the entire model with it. Before its dry wipe most of the paint off using a paper towel leaving the paint in the cracks and creating a wood grain.
4: Make a black 2 part paint to 3 parts thinner wash and repeat step 3.
5: Paint the toilet seat and roof grey.
6: Paint the floor and doorknob earth brown.
7: Dry brush cream over the entire model.
8: Add small model leaves to the roof using PVA glue.
| Date published | 15/11/2018 |