PrusaCube - simple, robust and easily portable enclosure / Original Prusa i3 mk3
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
PrusaCube - simple, robust and easily portable enclosure / Original Prusa i3 mk3
Hello,
this is a simple and easy-to-build enclosure for the Original Prusa i3 MK3. It is fixed on the printer so that it is easily portable. All the parts are easy to print - that means: support is almost not needed. There also is a detailed PDF instruction. A list of parts can be found below. You can use the Multi Material Upgrade 2.0 because 5 Spools of filament can be held. I was not able to print it or test it because I am not a Prusa owner (yet;) ). But it should work. Use this design for the cables of your bed: https://www.thingiverse.com/thing:2837970
Thanks for watching and if you print it: have a nice print!
Yours sincerely,
Simon
Part list:
- ~150 m4 hammer nuts (can also be printed)
- ~150 m4x10mm screws
- ~25 m4x16mm screws
- ~20 m4 nuts
- 6 m4 washers
- 4 anything with a diameter of 3mm and a lengh of 100mm (m3 threaded rod,...)
- all 3D printed parts
- 1x 16mm x 510mm pipe (better metall)
- eventually ground plate 490mm x 460mm
- or 4x foam (90mm x 90mm x 15mm or bigger)
aluminium extrusions (2020 with >/=5mm groove)
- 4x 499mm
- 4x 459mm
- 4x 489mm
- 2x 459mm
plexiglass: use 5mm
- 2x 250mm x 459mm
- 2x 494mm x 470mm
- 1x 500mm x 459mm
- 1x 500mm x 470mm
Print with orange Prusament for a nice look
Status | Under Review |
Support Free | YES |