Ramps 1.4 SECURE Enclosure
Ramps 1.4 SECURE Enclosure
3D
Published 2017-06-30T01:37:30+00:00
I designed this enclosure to work with my Ramps 1.4 board that came with my flying bear p902, but it should work for any Ramps 1.4 (with Arduino Mega) and 40mm cooling fan.
Features:
-Mounts to 20mm T-Slot railing
-Board screws to enclosure opposed to press fit
-Easy access back for wires
-Screw on lid and fan cover
To install you will need:
-5 m3 nuts
-2 m3x20 screws (for fan shroud)
-1 m3x55 (or longer)
-2 m3x35
-6 m4x8
-2 m4 T-Slot Nuts
-Spacers (I used the ones that came with the flying bear)
I have also included 2 different enclosures: One has it's t-slot holes aligned specifically for the flying bear printer and the other has elongated holes for different heights.
THIS MODEL IS UNDER MMF COPYRIGHT, SO PLEASE DO NOT SELL MY WORK ONTO ANY OTHER WEBSITES WITHOUT MY PERMISSION.
AlSO, PLEASE ATTRIBUTE ME WHEN POSTING PRINTS OF MY WORK.
THANKS.
| Date published | 30/06/2017 |
| Complexity | Medium |