Triceratops print-in-place
Triceratops print-in-place
Published 2015-04-02T12:22:51+00:00
With the new Jurassic Park coming out I thought that was cool to design a Triceratops print-in-place to continue the series of articulated toys that I've started to model two months ago (Torbjorn and Shardana characters).
It was another challenging project indeed because I had to split the dyno in 11 polygroups having care to checkthe thickness and the gaps between the articulated sections.
the head is moveble as well and the tail have a bit of freedom. Also the head can be detached from the model easily through a sphere with two small flat surfaces on the side.
0.2 layer height 10% infill Printed in replicator 2 in 5 hours and 50 minuts The model is already oriented and doesn't need any brim or raft: so for this reason is recommended to put platform adhesion type NONE
Date published | 02/04/2015 |
Time to do | 300 - 360 minutes |
Material Quantity | 100 grams |
Dimensions | 19cmx8cmx6cm |
Complexity | Difficult |
Support Free | YES |