Rowan Design's Print of Wii wheel
Community Print 3D Print of Wii wheel
Published 2017-12-28T17:54:05+00:00
7
0
Printed on: DA VINCI 2.0 Duo
Material: ABS
Description
Printed on 5% infill (should have done 20%) with slight imperfections e.g holes in the top, 0.1 layer height.
The hole for the remote was too small, I think because of no print imperfection allowance and so I had to file the print down, but next time I sized up the print and it wen't fine.