10 Inch Bong
10 Inch Bong
3D
Published 2020-04-13T19:50:13+00:00
7 years ago I made my first 3D printer (an Ultimaker) one of my first prints was a bong I downloaded from the internet. I ended up using that bong for 2 years before leaks on the bottom made it unusable. Now, I'd like to give back to the community with my own 3D printed bong design.
Many iterations on this design have got me to a bong that's functional, easy to print, and hits smoothly.
The spiraling arms are hollow and create a bit of extra percolation.
Here are the Specs:
14mm Downstem
Base 8 armed percolater
Internal Splash Guard
Ice Catcher
10 Inches tall
6 Oz for optimal water level
*Bonus Ash Catcher model included to ensure you don't get any ash into the Bong.
It can be difficult to clean internally so I highly recommend the Ash Catcher!
www.pre-volve.com if you'd like to buy a bong direct
I hope you enjoy :)
I recommend printing with 2 walls and a as many base layers as possible. Overextruding slightly may help with leaking issues, but can result in a poorer surfer finish and overhang issues. I prefer to print in TPU for a more comfortable feel to the Bong.
| Date published | 13/04/2020 |
| ¿Cuándo tiempo lleva? | 12 - minutos |
| Cantidad de filamento | 120 grams |
| Dimensiones | 210 x 210 x 250 mm |
| Sin apoyo | YES |
This came out great as a gift for my friend. Took 29.2 hours, but was well worth it. It's light weight and feels solid. Thanks for creating this.