3x3 Slide Puzzle
3x3 Slide Puzzle
Published 2019-07-16T05:20:11+00:00
This is a model of the classic 3x3 Slide Puzzle. I designed this using TinkerCAD (https://www.tinkercad.com/things/0Es7kiRoCVD). The tolerances between the pieces are 1mm, I usually print them at 70% scale so they have a .7mm tolerance. No supports necessary!
I modeled this because I could not find a 3x3 slide puzzle available for commercial use that I liked. If you sell my items in a commercial setting, I humbly request 10% of the profits though I have no enforcement mechanism =P . Though no kickback is necessary for casual sales to friends/gifts for children.
Nothing Fancy, just make sure you have good bed adhesion. I print mine at .3mm layer height with no problems, and you can get away with 0% infill if you feel like saving plastic.
Date published | 16/07/2019 |
Sin apoyo | YES |
Printed at 70% scale with .12mm layers. Took about five hours to print. The pieces were fully separate, but a bit too loose.