AEAADV05 - Wilderness Shrine
$2.00 AEAADV05 - Wilderness Shrine
3D
Published 2020-12-30T11:38:29+00:00
This set is included in our 3 month loyalty pack for Tribers pledging $15 or more.
This giant piece of scatter terrain prints roughly 100mm x 100mm and makes a great place to leave a sacrifice, offering, or just have a little high ground encounter. It was sculpted by Jeromy K. Smith for the wonderful patrons of Aether Studios. It was later expanded with tile versions based on our grass and thicket terrain styles.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 30/12/2020 |
| Precio | $2.00 |
| Dimensiones | 100mm L x 70mm H x 100mm W |
| Sin apoyo | YES |
This is a cropped, smaller version of the sculpt that I upscaled and based.