Seradon Starmaster
2,553
visitas
15
colecciones
0 comentarios
Cargando comentarios...
$8.00 Seradon Starmaster
3D
Published 2021-10-02T11:15:03+00:00
25
0
Add to Collection
Descripción
Here is the Seradon Cosmoleader from StarScales ! He is the most savage amongst the Seradon rider and ride the biggest and baddest of those flying carnivore ! This set comes with 3 parts and a round base. All parts are presupported and no support for those who wants to do their own. Riders and mount are separated files.
Get a 40% discount on this pack by joining the Patreon right now !! : patreon.com/ClayBeastCreation
Información técnica
| Date published | 02/10/2021 |
| Precio | $8.00 |
Más información
Archivos
Seradon only. Looks great and the scale is spot on, no need to resize. Able to fit seradon, rider, and stand all on one build plate but almost no room left. Will say to be careful removing supports as 2 claws and the right wing tip broke while I was doing so, but experience may vary with settings/resin. Only with it would come in smaller parts, might reduce print time/support removal. Still, glad to have purchased! Room Temp- 75F 20%humidity Resin - Elegoo Clear Blue Water Washable Settings - 6/burn in layers; 18s/exposure; .035mm/layer height; 5s/light off delay; 9s/exposure time; 4.5mm/lift after print; 115mm/m/lifting speed; 150mm/m/lowering speed. ~19.5hr printing time Cleaned by letting soak in "mean green" cleaning product, with supports. Makes support removal a lot easier. Rinsed in clean water after support removal. Final cure under UV lamp ~5-10min.