Springy Shape
Sin soporte
Destacado
4,287
visitas
134
descargas
6
colecciones
0 comentarios
Cargando comentarios...
Springy Shape
3D
Published 2015-09-18T10:47:11+00:00
22
0
Add to Collection
Descripción
Single piece print that folds up to become a bouncy ball.
additional materials:
-hot glue gun
1 - print. I printed these with my default settings: 0.1mm layer height and .8mm shell thickness, no support or raft. I used PLA for the prints shown here.
2 - carefully remove from build plate. work inward around perimeter.
3 - put a dot of hotglue on each corner, fold up and hold.
4 - continue until you have two hemispheres glued up.
5 - put glue around seam and close up.
note: to get just the protrusions a different color, I switched filament at exactly 2.05mm with the use of a software plugin
Detalles de impresión
Print at 0.2 mm layer height, with 10% infill.
Información técnica
Date published | 18/09/2015 |
¿Cuándo tiempo lleva? | 108 - 118 minutos |
Cantidad de filamento | 20 g |
Dimensiones | 163 x 80 x 21 |
Tecnología | FDM |
Complejidad | Medio |
Sin apoyo | YES |
Más información
Archivos