Stem ware hanger
4,508
visitas
136
descargas
1
colección
0 comentarios
Cargando comentarios...
Stem ware hanger
3D
Published 2015-03-17T20:48:06+00:00
15
0
Add to Collection
Descripción
3D print New York
Stem ware hanger that screws to the under side of your cabinets.
Safely stores your stem ware inverted to keep dust out of the glass
for Under cabinet .storage.
Instructions:
Material; Your choice HIPS, ABS, PLA
Raft & supports OFF
infill 35%
Use flat head #6 screws to attach to underside of cabinet.
Place multiple pieces end to end to lengthen hanger.
Note on some cabinets may have recessed bottom and you may need to add a piece of wood to level out the bottom and allow stem ware base to slide into slot.
Detalles de impresión
Print at 0.2 mm layer height, with 10% infill. This uses 132 g of filament and takes 685 minutes.
Información técnica
Date published | 17/03/2015 |
¿Cuándo tiempo lleva? | 685 - 695 minutos |
Cantidad de filamento | 132 g |
Dimensiones | 58 x 140 x 140 mm |
Complejidad | Muy fácil |
Sin apoyo | YES |
Más información
Archivos