Sunny Self-Watering Planter
Sunny Self-Watering Planter
3D
Published 2018-07-16T17:05:05+00:00
Plant herbs or strawberries in this self-watering planter and you'll have a fun edible centerpiece for your summer picnic! Print it double-sized and you can plant celery for a perfect summertime snack.
Mark the float before adding the water the first time, then you will always know when it's time to refill the reservoir!
(Note: Since 3D printing tends to be porous, you'll want to apply a sealant to the water reservoir and float prior to use.)
#tinkerfun
All angles are 45 degrees or steeper, so no support material is needed (not even for the ledges!).
It's best to print the float by itself, so you can specify no infill (you want it as light as possible, so it will float).
| Date published | 16/07/2018 |
| Dimensiones | 191mm x 196mm x 134mm |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |