The next beverage holder for people with disabilities
The next beverage holder for people with disabilities
3D
Published 2018-03-01T11:56:48+00:00
This is my next version of the beverage holder for people with disabilities. It is designed to be adjustable in height and inclination. You can put a glass, cup or can in it. If you put a little ribbon around it, it keeps neatly in place, even if someone hits the table it is standing on. With it wide legs it is almost tip-over-proof.
The beverage holder consists of five parts: two screws, two legs and one plattform. Everything can be printed in about 5 hours.
I hope you enjoy my design. Make sure to check the video (https://www.youtube.com/watch?v=zIda8vDgoi0) to see it in action. I design these kind of aids as a hobby. Please visit my website at https://makershelpcare.de/.
Cheers!
Nils
I printed the beverage holder in the pictures with 10% infill and a resolution of 0.2mm. No supports required.
Here are some details on the printing time and the weight.
legs: approx. 2h 30min (about 35 grams) per piece
screws: approx. 30 min (7 grams) per piece
platform: approx. 3h 30min (60 grams)
| Date published | 01/03/2018 |
| ¿Cuándo tiempo lleva? | 510 - 510 minutos |
| Cantidad de filamento | 150 |
| Dimensiones | 150mm x 100 x 50 mm |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |