A-22B Chao ( Cyberpunk 2077)
A-22B Chao ( Cyberpunk 2077)
Published 2021-01-10T12:21:28+00:00
A-22B Chao
Cyberpunk 2077 has a lot of cool gun designs but this one stood out for me just because of the reload animation and the big round knurled bar.
I made it so that it can be reloaded ( see pictures) by using little 5x3mm magnets. If you don't want to bother with that you can just glue it together.
The wire that connects the base of the gun with the little camera is also not printed. I used a piece of paracord and some heatshrink tubing to give it the correct finish.
When you glue the 2 halfs of the main body together make sure you put in the trigger first as there is no way to get it in after.
The only parts that need any gap filling are main body left and main body right. Every other seem is part of the design.
I hope you have fun putting it together and don't hesitate to upload a picture of your prints here or on social media ( tag me!).
Date published | 10/01/2021 |
Dimensioni | 240 x 200 x 35 |
Thanks for creating this awesome model! It was a pleasure to 3D print it. I added some extra magnets so the barrel hold better. My video: https://youtu.be/R4-APCB4Ztc