Monster Hunter Sword
Monster Hunter Sword
Published 2017-02-20T19:19:00+00:00
This is my Monster Hunter sword for the Raise3D/Capcom Competition. Printed full size it's over 4 feet long - 1.25m
It's designed to have a 5mm metal rod run through the center which can be purchased from most DIY stores. It also has extra alignment dowels for ease of assembly and added strength, I would advise printing these in ABS with 100% Fill.
The assembly is straight forward but if you have any questions just let me know. (Prints without support)
Mine was printed in ABS on a Robox. It was then sanded, filled and primed before giving it a Candy red paint job (Paint by Plastikote).
The details of the handle have been modelled so that you have the option of painting straight on to the print or like me you can choose to wrap the handle with another material.
Hope you like it :)
Martin
Date published | 20/02/2017 |
Dimensioni | 1.3 Metres |
Tecnologia | FDM |
Complessità | Very Difficult |
Supporto Gratuito | YES |
I'm so happy how it turned out, it took around 2 months to print, sand and paint it due to my schedule but I love it.