The Roadrunner
The Roadrunner
Published 2018-04-27T12:32:15+00:00
Hi!
Playing with Sculptris i made this!!
I call it 'The Roadrunner', it's just a guy and his monocycle.
Figure in pictures is printed at 2x scale. Also i made some test at 75% and it can print well.
I used my favourite combo of Fillamentum PLA (Vertigo grey + Iceland Blue + Gold Happens) for the figure in photos.
See Printing details section for more info.
Hope you like it.
Have fun!!!
Main figure is printed with 0% infill, 3 walls/perimeters, 3 bottoms and 4 top layers.
Supports required, i reoriented the STL as i printed but feel free to find a better position or orientation in your slicer.
You may need sanding to put the 'flames' into figure so i recommend using a -0.2 horizontal expansion and use some glue if aome parts are loose
Date published | 27/04/2018 |
Tecnologia | FDM |
Complessità | Medium |
We are provide the Roadrunner mail support online portal in the USA. Here you can visit for solving Roadrunner email problems easily in just few time. Call us @ +1-833-536-6219. https://roadrunnermailsupport.com/roadrunner-email-problems